Search found 27 matches

by Steven67
Thu Oct 22, 2009 3:50 pm
Forum: Software & Tweaking
Topic: Unable to rase my FSB via CPUCool
Replies: 5
Views: 4970

Hello, I had received nice help here from Jim and others, so I would help you, even if I am not an expert. If you want to have the fsb 'setting' function in Cpucool, I think you have to register to the author W Podien. It is a nice software. To raise the fsb, be sure that the selected pll is the 'Wi...
by Steven67
Mon Aug 31, 2009 5:42 am
Forum: Hardware / Tech Corner
Topic: where are the embedded K6+ ??
Replies: 9
Views: 5662

K6 3+ embedded

hello, nice if this link can help you to find your 'baby' ... I bought mine in France, but I think it came from this vendor in Deutchland. It runs fine @600 with 2,1-2,2 volts and 617-620 is ok with 2,4 volts. I have never tried 2,5 volts nor read someone runs @2,5 volts. Here is @617 mhz http://www...
by Steven67
Fri Aug 28, 2009 9:08 am
Forum: Hardware / Tech Corner
Topic: where are the embedded K6+ ??
Replies: 9
Views: 5662

In Deutchland, here they are ...

http://cgi.ebay.de/SOKET-7-BOARD-bis-60 ... 286.c0.m14


Best regards.
by Steven67
Thu Aug 06, 2009 2:09 pm
Forum: Software & Tweaking
Topic: WPCredit as applied to a DFI K6BV3+/66
Replies: 48
Views: 29804

My new Ram read score on DFI K6BV3+/66 - K6-3+ ATZ

Hello, Jim

do you remember our discussion about my 'read ram score' , this is a new one ;)

Image

I got a new Voodoo5 as you can see.
by Steven67
Tue Jul 28, 2009 3:00 pm
Forum: Software & Tweaking
Topic: Are you Windows 7 ready ?
Replies: 3
Views: 4532

K6 on Win 7

@jsc1973 : Win 7 runs fine on my system, performances 30% less under Win 98 Se. With 512 Mo ram or more, can surf (not too fast) on internet with firewall and so on. Do a double-boot with 2 disks to swap beetwem 7 and other OS.

@Jim : Ah ! Ah ! Ah ! Is it not ATIrrelevant ?
by Steven67
Sat Jul 25, 2009 6:57 am
Forum: Software & Tweaking
Topic: Are you Windows 7 ready ?
Replies: 3
Views: 4532

Are you Windows 7 ready ?

Place to share informations about K6, mobo & GPU running on win 7.

K6, DFI K6BV3+/66 and 3dfx V4500 windows seven ready

Image

Looking for Radeon 7500 (RV200) drivers.
by Steven67
Sat Jul 25, 2009 6:52 am
Forum: Hardware / Tech Corner
Topic: K6-2+ will not fit in ZIF super socket 7
Replies: 3
Views: 2841

Not fit in Socket

Did you unlock correctly the socket ?
by Steven67
Tue Apr 28, 2009 4:18 pm
Forum: Hardware / Tech Corner
Topic: Radeon 7500 compatibility on DFI K6BV3+/66 and Win98SE
Replies: 10
Views: 5734

Radeon 7500 & K6 3+ ATZ

Don Pedro, on 3DMark2001 SE, my score is 1320 points (Hardware T&L activated) on reference benchmark ie : 1024*768 - color 32bits - no AA K6 @575 (115*5) and Radeon 7500 @290 mhz (core) / 366 mhz (ram) This is better than a 3dfx Voodoo 4500 but less than a 3dfx Voodoo 5500 (can't find one) Which is ...
by Steven67
Sun Apr 19, 2009 7:18 am
Forum: Hardware / Tech Corner
Topic: Radeon 7500 compatibility on DFI K6BV3+/66 and Win98SE
Replies: 10
Views: 5734

RADEON 7500 ON DFI K6bv3+/66 & K6 ATZ @575

Hello,

thank you for your help. Was not here somedays because a f--cking problem of virus. Finally set everything for the Radeon with a Voodoo Pci and switch from pci to agp at last.

Here is a screen.

Image
by Steven67
Wed Apr 08, 2009 3:28 pm
Forum: Hardware / Tech Corner
Topic: Radeon 7500 compatibility on DFI K6BV3+/66 and Win98SE
Replies: 10
Views: 5734

Thank You Don Pedro, load Via 4in1 the version you linked on Viaarena ...
Videos seems finer and cleaner on my 3dfx Voodoo3000 Pci .
For the moment I let the Radeon, bored with drivers problems.
by Steven67
Tue Apr 07, 2009 3:29 am
Forum: Hardware / Tech Corner
Topic: Radeon 7500 compatibility on DFI K6BV3+/66 and Win98SE
Replies: 10
Views: 5734

Hi, yes , yes and thank you very much both to you for these fine advice. I made a few researches about that. The first warning seems nothing I agree with you Don Pedro. The MS knowledge base indicates that my problem 'erreur de protection windows' could be caused by a conflict between a hardware dri...
by Steven67
Mon Apr 06, 2009 2:06 am
Forum: Hardware / Tech Corner
Topic: Radeon 7500 compatibility on DFI K6BV3+/66 and Win98SE
Replies: 10
Views: 5734

Thank you for that Jim, I will try it because catalyst 3.9 (from guru3d) does'nt istall. I will begin with a Ccmos and reinstall with the GPU only. Jim, I don't understand what you mean with 'no acpi' by setting setup to /pj parameter. It seems that parameter is needed to activate Acpi : citation : ...
by Steven67
Sun Apr 05, 2009 10:38 am
Forum: Hardware / Tech Corner
Topic: Radeon 7500 compatibility on DFI K6BV3+/66 and Win98SE
Replies: 10
Views: 5734

Radeon 7500 compatibility on DFI K6BV3+/66 and Win98SE

Hi, (sorry for my weak english ...) I got a Connect3D Radeon 7500 agp 64 Mo DDR and I tried to use it on my DFI K6BV3+/66 rev B under Win98se. At boot, this Gpu is recognized as PCI VGA card and a generic driver is applied (16 colours and 640*480 max). I verified with Everest that the card is well k...
by Steven67
Sat Mar 14, 2009 2:50 pm
Forum: Hardware / Tech Corner
Topic: Voodoo 3 r.i.p
Replies: 32
Views: 12635

I Wanna have fun too !!! Dear Jim, sorry but ram and Cpu test scores are unchanged. Now I am working on Disk and Usb access to optimize. Sandra, But where is that bench ? Sandra 2001 seems infected by malicious worm, I will not dwld it. Sisoft-Sandra ... But Is there a Win9x version somewhere ? Is t...
by Steven67
Fri Mar 13, 2009 11:38 am
Forum: Hardware / Tech Corner
Topic: Voodoo 3 r.i.p
Replies: 32
Views: 12635

K6 & 3DFX roXXe !!

Hi Jim, last screens from 3Dmark2000 shot by Fraps 1.9 1/ Emboss 2 passes 174 fps ... http://www.generation-3d.com/forum/mesimages/54786/Emboss174jpg.jpg 2/ Pixel Fillrate 259 fps ... http://www.generation-3d.com/forum/mesimages/54786/Fillrate259jpg.jpg 3/ Texture 8 mb :mrgreen: 350 fps ! http://www...