Search found 113 matches

by punkrawker82
Wed Apr 07, 2004 1:52 pm
Forum: Software & Tweaking
Topic: Verify BIOS settings on RedHat Linux 9, PowerTweak, k6speed
Replies: 7
Views: 7102

Bah, sorry, when looking at this through hotmail, it won't let you sign in apparently...
by punkrawker82
Tue Apr 06, 2004 2:43 pm
Forum: Software & Tweaking
Topic: Verify BIOS settings on RedHat Linux 9, PowerTweak, k6speed
Replies: 7
Views: 7102

Ahh, well it won't post at 500Mhz with manual jumper settings of (5.0 x 100 = 500). I had been stuck at (5.0 x 95 = 475), but I found that I can change my FSB speed from 95 to 100 with CPUCool. It ran days on end with a high load and no problems. I'm glad I can finally get it to run at 500Mhz with C...
by punkrawker82
Sun Apr 04, 2004 4:54 pm
Forum: Software & Tweaking
Topic: Verify BIOS settings on RedHat Linux 9, PowerTweak, k6speed
Replies: 7
Views: 7102

Maybe the creators of K6speed would be kind enough to give you the source file and you could then recompile it with your newer version of gcc??

Either that or search for another app that fills your needs...

Good Luck :D
by punkrawker82
Fri Apr 02, 2004 3:19 pm
Forum: Hardware / Tech Corner
Topic: K6 III+ 450 MHZ
Replies: 10
Views: 6654

http://compatlist.k6plus.com/

Pick one ya like... :D
by punkrawker82
Fri Mar 19, 2004 4:46 pm
Forum: Hardware / Tech Corner
Topic: The most popular overclock here...
Replies: 6
Views: 5344

There are also the undocumented settings of: 2.5V S O S O 2.6V O S S O 2.7V S S S O . . . 3.0V O S O S 3.1V S S O S Just incase you need them...don't know why they left them out :?: Your CPU is probably 2.2/2.4 like Wiggy said, and I figured you might like the voltages of 2.5/2.6 incase you overcloc...
by punkrawker82
Fri Mar 19, 2004 4:34 pm
Forum: Hardware / Tech Corner
Topic: gf2 mx200 64M - to keep or not ?
Replies: 26
Views: 15289

Very true, but with the GF FX's out you could also probably buy a GF4 Ti 4200 just as cheap as a GF3. Not sure how they compare in performance... :D
by punkrawker82
Wed Mar 17, 2004 7:07 pm
Forum: Hardware / Tech Corner
Topic: 5200 fx
Replies: 8
Views: 5947

I think you can manually edit that type of thing through the Device Manager, just setting the resources to different ranges for either the videocard or your agp controller. But I've never done that...nor would I try. I wouldn't know what's being used and what's free...not sure what range is set for ...
by punkrawker82
Wed Mar 17, 2004 1:10 am
Forum: Hardware / Tech Corner
Topic: matsonic MS6260S
Replies: 1
Views: 2651

ya, from the specs and a few forum posts I've seen elsewhere, it seems to be a nice board with K6-2+ support up to 550Mhz. It probably supports K6-III+'s as well. :shock: However..I've seen some conflicting specs on a few sites. Some say it has the ALi "Aladdin V" chipset while others say ...
by punkrawker82
Wed Mar 17, 2004 1:03 am
Forum: Hardware / Tech Corner
Topic: 5200 fx
Replies: 8
Views: 5947

Det v43.45's are nice, give those a try if the 5200 works on S7 boards :D
by punkrawker82
Wed Mar 17, 2004 1:00 am
Forum: Hardware / Tech Corner
Topic: gf2 mx200 64M - to keep or not ?
Replies: 26
Views: 15289

oops, forgot to log in that last post... :oops:
by punkrawker82
Tue Mar 02, 2004 9:39 am
Forum: Hardware / Tech Corner
Topic: 500MHZ @ only 350MHz
Replies: 4
Views: 3407

2/1 says Esupport is wrong then... :D
by punkrawker82
Mon Mar 01, 2004 12:44 pm
Forum: Hardware / Tech Corner
Topic: DFI K6BV3+/66
Replies: 19
Views: 12146

Bits - FSB ======= 000 - 100 001 - 75 010 - 83 011 - 66 100 - 95/97 101 - ??? 110 - ??? 111 - (60 I'm guessing...Based on some differences between 100, 95, and 66) Those are your 8 possible on/off bit combinations: 1=switch on 0=switch off You could try the 3 unknowns, but they might have been undoc...
by punkrawker82
Mon Mar 01, 2004 12:12 pm
Forum: Hardware / Tech Corner
Topic: 500MHZ @ only 350MHz
Replies: 4
Views: 3407

What speed does it report when you boot your comp??
And what speed is reported when you run a program like CPUID??
by punkrawker82
Mon Mar 01, 2004 12:08 am
Forum: Hardware / Tech Corner
Topic: Where to find a K6-III+ 550
Replies: 5
Views: 4187

That's exactly what I've done, and I actually use this as my main system(Note: Because I have no other system :cry: ). But this summer I'm going to upgrade to an Athlon64/Barton and a new mobo/ram depending on what's out there and what the prices will be...So I'll have an up-to-date comp and have to...
by punkrawker82
Sun Feb 29, 2004 2:04 pm
Forum: Hardware / Tech Corner
Topic: Removed
Replies: 19
Views: 15356

Yes, but I've seen mobile Bartons listed as 266 FSB while the Regular Batrons are 333 FSB....If the mobiles really are at 266 FSB, then why not just get the locked Barton at 333 FSB?? Is it worth buying something that has a slower FSB just to OC it and end up with the same performance as a Locked Ba...