PC Chips Motherboard

Off topic chat and stuff that doesn't fit elsewhere.
Post Reply
katulu50
Newbie K6'er
Posts: 1
Joined: Mon Feb 19, 2007 3:21 pm

PC Chips Motherboard

Post by katulu50 » Mon Feb 19, 2007 3:22 pm

Hi, I've found an old SIS 530 (I think is a PCCHIPS M748 or earlier) and I want to use it again, so i found every hardware in it's right place (RAM,Video, Processor) so when i turn it on, it doesn't seem to do something, it doesn't appear any image (even BIOS checking) so i try to put a pci video card (NVIDIA) and i tried again with the same result, I changed ram memory of position. So the pc doesn't seem to initializate the devices, so any help would be great. Thanks

User avatar
KachiWachi
K6'er Elite
Posts: 507
Joined: Wed Sep 21, 2005 10:53 am
Location: Pennsylvania, USA

Post by KachiWachi » Mon Feb 19, 2007 4:39 pm

Pull the RAM and try to boot.

If it doesn't beep at you, start by checking the CPU, Power Supply, and Motherboard itself.

Thanks.
Moderator - Wim's BIOS

PC #1 - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), 128 MB EDO. BIOS patched by Jan Steunebrink.
PC #2 - Amptron PM-7900 (M520), i200 non-MMX, 128 MB EDO
PC #3 - HP8766C, PIII-667, 768 MB SDRAM
PC #4 - ASUS P3V4X, PIII-733, 256 MB SDRAM
PC #5 - Gateway 700X, P4-2.0 GHz, 768 MB PC800 RDRAM
PC #6 - COMPAQ Evo N1020v laptop, P4-2.4 GHz, 1 GB PC2700 DDR
PC #7 - Dell Dimension 4600i, P4-2.8 GHz, 512 MB PC2700 DDR
PC #8 - Acer EeePC netbook, Atom N270 @ 1.60 GHz, 1 GB RAM
PC #9 - ??? ;)

Post Reply