I've had this monitor for a while and I'm probably the third owner it's had (my family share upgrade discards), I was naturally curious about the condition of it's capacitors after hearing of others with venting components causing all kinds of collateral damage... from flickering displays to ruptured IC's.
Here you can see the beginning of the end for this section of the power regulator board, in the forefront you can just make out (amongst the hot glue) a domed 270uF 25v CapXon electrolytic, being a better safe than sorry kinda' guy I pulled all the CapXon's out (they're not highly regarded anyway).
Now I'll spare you all the de-soldering waffle and just show you the end result, as I already had 2 Hitano 1000uF 10v GP's on hand I just grabbed the remaining as lowESR spec'd Hitano (EXR series), I probably should have used all EXR series only time will tell, regardless Hitano make excellent quality components.
An easy job certainly less demanding than recapping a PSU (space constraints) or Mainboard (awkward handling)... highly recommended!
Acer AL1916W LCD powerboard capacitor re-population
RE: Acer AL1916W LCD powerboard capacitor re-population
What size is the monitor ?
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
Worth doing then. I've had a 21" and a 20" but the 21"er was shot. The twenty is still ok though.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
Nothing wrong with that. I still have a 21" CRT as the display on my main computer. And an even more Jurassic IBM Model M keyboard.
FIC VA-503+, Rev. 1.2, AMD K6-III+ 450@550MHz, 80GB Seagate ATA-100, 3dfx Voodoo3 3500 TV, TB Montego II Quadzilla, Win98se, 384MB PC100
Compaq Presario 1273, AMD K6-III+ 450@400MHz 1.8v, 40GB Samsung 5400RPM, extremely hacked Win98SE, 288 (yes, 288!) MB RAM
(Also an AMD FX-8350, which does the heavy lifting these days...)
Compaq Presario 1273, AMD K6-III+ 450@400MHz 1.8v, 40GB Samsung 5400RPM, extremely hacked Win98SE, 288 (yes, 288!) MB RAM
(Also an AMD FX-8350, which does the heavy lifting these days...)