bronx69 post away!

Off topic chat and stuff that doesn't fit elsewhere.
Post Reply
Old Elf
Senior K6'er
Posts: 137
Joined: Sun Jun 03, 2001 2:13 am

bronx69 post away!

Post by Old Elf »

you have to post 21 times like the rest of us !!!!<br>Hay on your 124 blast.<br>do you have VIO adjust on there?<br>do you have mother board monitor<br>on there?<br>if you do, what is your 3.3V at or VIO<br>set to? thanks <br>Elf. <p></p><i></i>
bronx69
Junior K6'er
Posts: 42
Joined: Thu Jun 07, 2001 6:57 am

24 posts?

Post by bronx69 »

24 posts?<br>whats up with that?<br><br><br>AND THANKS.<br> MY CORE VOLTAGE IS SET TO 2.1<br>THAT MAY BE WHY I CANT HOLD STABLE DURING TESTING GUT I HAVENT HAD THE CHANCE TO DO A PROPER TESTING OF THE SYSTEM BECAUSE I HAVE HAD A COUPLE OF OTHER SYSTEMS IN MY LIFE LATELY THAT I MUST FIX FOR PROFIT OF COURSE<!--EZCODE EMOTICON START :) --><img src=http://www.ezboard.com/intl/aenglish/im ... /smile.gif ALT=":)"><!--EZCODE EMOTICON END--> <br>BUT ANOTHER INTRESTING SITUATION HAS ARISED I JUST BECAME THE PROWED OWNER OF A DX4 100MHZ CPU EQUIPED SYSTEM WITH 24 MB OF RAM AND A 750 MB HD NOW I KNOW THIS IS NOT AN IMPRESIVE SYSTEM BUT IT SURE AS HELL MAKES AN GREAT SERVER THAT CAN PROFORM ALL OF MY MOST INTESIVE INTERNET TASKS SUCH AS VIRUS SCANNING AND FIRWALL PROTECTION I PLAN TO RUN LINUX AN FORTUNIT FOR ME IT JUST SO HAPENS I JUST MET A GUY WHOS A LINUX GEEK AN IS WILLING TO TEACH ME THE ROPES. <br>AS FOR VIO WHATS THAT?<br>VIDEO INPUT OUPUT?<br><br>SORRY ABOUT THE CAPS. <p></p><i></i>
Old Elf
Senior K6'er
Posts: 137
Joined: Sun Jun 03, 2001 2:13 am

Re: bronx69 post away!

Post by Old Elf »

Hi, Bronx<br><br>Hey I guess WE TWO can figger out the<br>VIO togeather. as I under stand it is<br>Voltage In Voltage Out.<br>and refers to 3.3V lines inside the computer.<br>my soyo dose not have it on the motherboard.<br>referance to it is at aceshardware on the review<br>for the 550+ . he did better when he adjusted it.<br><br>First I want to say I don't think uncapping the CPU<br>dose to much for us on the 6+ CPUs<br>there is so little heat. I have been thinking of<br>how to isolate the cold pelter from everything<br>else, my problem now is air blowing around on<br>the mother board heats up the cpu-cold block.<br><br>not to many of us left to try things like pelters<br>on SS7.<br><br>If you want to, I talked relay and toast into letting<br>us, you, me , theory, uart, kyle, have a TECH CORNER<br>so we can post on the technical stuff there.<br><br>I hope you can make it to 744<br>I did just bairly .<br><br>I found out you don't have to over volt the CPU<br>to get faster , just colder.<br>2.2V though is no big deal, 2.3V is getting in the <br>area of over voltage but should be fine at COLD temps.<br>I'll start some post on PELTERS, and VOLTAGES on the tech corner.<br>see you there<br>Elf.<br><br> <p></p><i></i>
Post Reply