Removed

Discussion relating to Socket 7 hardware.
Jim
K6'er Elite
Posts: 1745
Joined: Wed Jan 21, 2004 7:10 pm
Location: Toronto

Removed

Post by Jim »

Removed
Last edited by Jim on Sun Aug 07, 2005 6:38 am, edited 1 time in total.
User avatar
punkrawker82
Senior K6'er
Posts: 113
Joined: Tue Jul 29, 2003 9:06 pm

Post by punkrawker82 »

I found this site. I don't know what language it is, but its translatable...kinda:

http://www.pc.sk/MB/qdi.htm

QDI Legend 7

Chipset
Intel 82440LX AGPset supports 66MHz SDRAM
Intel 82371EB(PIIX4E)


Zbernice

Bus Type
3 PCI local bus sloty
2 ISA bus sloty
1 AGP slot

CPU
Intel Socket® 370 processor 300A/333/366/400MHz a vyssie
1.5V, 2.5V a 3.3V regulatory na doske


Frekvencia zbernice
66MHz

Systemova Pamät
Dva 168pin 3.3V 66MHz DIMM sockety podporujuce DRAM do 256MB a EDO DRAM do 512MB


BIOS
Licensed advanced AWARD BIOS
2Mbit flash ROM, Plug and Play ready
Trend ChipAwayVirus on Guard

IDE
Dva PCI Master IDE porty

Vstupno / výstupné charakteristiky
Winbond W83977 EF I/O chip
Vsetky I/O ports mozu byt Zapnute/Vypnute vBIOS setupe
1 Floppy port supports up to two 3.5'' or 5.25'' floppy drivers (360K / 720K / 1.2M / 1.44M / 2.88M)
Supports LS-120 floppy disk driver and ZIP drive
2 High speed 16550 fast compatible UARTs (COM1/COM2/COM3/COM4 selectable)
1 Enhanced parallel port (SPP/EPP/ECP)
IrDA port supports up to 115.2KB/Sec transfer rate

Clock Chip
ICWorks W48S87-04 (48pin) single chip with I2C

Iné dôležité charakteristiky
On-board Winbond W83782D supports system monitoring (system voltage & temperature, fan's speed and chassis intrusion)
Podporuje obe stadndardy napajania ATX aj AT
Trend ChipAwayVirus on Guard

Velkosť dosky
220mm X 230mm (Baby AT)

strange though I couldn't find an english site with this board... :)
Past System
----------
Asus P5A-B rev1.05(Beta BIOS 1011.005)
AMD K6-2/CXT AFX @ 500Mhz(CPUCool 5 x 100)
128Mb PC100 SDRAM
VisionTek GeForce 4 MX 440 4x AGP @2x w/ 64Mb DDR
Creative Ensoniq PCI Sound Card
ADS Turbo Quad 4 Port USB PCI Card
Linksys NC100 v2 NIC
Western Digital 8Mb Cache SE 80Gb HD
Lite-On 52x32x52 CDR/RW
Lite-On 16x48 DVD

Current
----------
Athlon XP-A(Barton) 2600+ @ 1.91Ghz
Abit NF7-S v2.0
512Mb Kingston 3200 DDR(2.5-3-3-7)
VisionTek GeForce 4 MX 440 4x AGP w/ 64Mb DDR
User avatar
Nohr
Nohrmal
Posts: 739
Joined: Sat Jun 02, 2001 8:26 pm
Contact:

Post by Nohr »

I think the model you're looking for is LegenX and not Legend.

QDI LegenX 7 Product Page
PDF Manual Download
User avatar
Wiggy
Senior K6'er
Posts: 173
Joined: Sat Apr 05, 2003 9:39 am
Location: Surrey, England

Post by Wiggy »

There's no reason why PC100 shouldn't work.

Have you tryed fiddling with the RAM timings?
DasMan2

Post by DasMan2 »

I think the LX chipset is limited by whatever to only 66 bus speed .
(Sucks)

Nice setup for a Baby AT socket 370 board had it better Bus speed selections .
User avatar
Wiggy
Senior K6'er
Posts: 173
Joined: Sat Apr 05, 2003 9:39 am
Location: Surrey, England

Post by Wiggy »

Yes, but PC100/133 would just run at 66mhz by default if you were to put in a an LX chipset mobo.
Jim
K6'er Elite
Posts: 1745
Joined: Wed Jan 21, 2004 7:10 pm
Location: Toronto

Post by Jim »

Removed
Last edited by Jim on Sun Aug 07, 2005 6:39 am, edited 3 times in total.
User avatar
tazwegion
Veteran K6'er
Posts: 349
Joined: Sat Jun 21, 2003 11:13 am
Location: Victoria, Australia

Post by tazwegion »

Jim wrote:The board is a bit oddball re speed settings - what it does is automatically sense the processor speed, (up to 533), and set it accordingly. It does give you the option of overclocking the bus; with settings available for 66, 68, 75, & 83 mhz; but it does not allow you to set the multiplier. I have had it stable at 600 mhz. That is :

(533 = 8x66 - [automatic] - with the bus reset to 75, = 8x75=600). I called QDI and they said double sided low density Inferon or Micron ram should work. I guess it just doesn't like "Kingston" - but then who does ? - thats a penetentiary in this country.
Hey... don't be insulting :P my MSI 6161 has exactly the same fsb settings, additionally the boards of the era were reportedly only able to support up to 466Mhz (despite also using a 533 :wink:)

However I found the 400 more OC'able using the 83fsb setting (the 533 doesn't like above 68fsb much :()

Also I've used Pc66/100/133 no difficulties @ all, except NB heat issues r/t high fsb (fixed with custom NB H/sink) :)

As far as posting links... right click the mouse over the 'ad' you wish to use (copy)... (when in post mode) click URL... paste particular 'ad' then close link coding by clicking on Close Tags ;)
Image
Jim
K6'er Elite
Posts: 1745
Joined: Wed Jan 21, 2004 7:10 pm
Location: Toronto

Post by Jim »

Removed
Last edited by Jim on Sun Aug 07, 2005 6:40 am, edited 1 time in total.
User avatar
Wiggy
Senior K6'er
Posts: 173
Joined: Sat Apr 05, 2003 9:39 am
Location: Surrey, England

Post by Wiggy »

Every Intel CPU from the Pentium II (including your Celeron) upwards has been multiplier locked, meaning that overclocking is only possible from upping the FSB. It's perfectly normal. :wink:

Even the latest P4s are multi locked.
Jim
K6'er Elite
Posts: 1745
Joined: Wed Jan 21, 2004 7:10 pm
Location: Toronto

Post by Jim »

Removed
Last edited by Jim on Sun Aug 07, 2005 6:41 am, edited 2 times in total.
User avatar
punkrawker82
Senior K6'er
Posts: 113
Joined: Tue Jul 29, 2003 9:06 pm

Post by punkrawker82 »

That doesn't mean he can't UNLOCK his celeron.... :twisted:
Past System
----------
Asus P5A-B rev1.05(Beta BIOS 1011.005)
AMD K6-2/CXT AFX @ 500Mhz(CPUCool 5 x 100)
128Mb PC100 SDRAM
VisionTek GeForce 4 MX 440 4x AGP @2x w/ 64Mb DDR
Creative Ensoniq PCI Sound Card
ADS Turbo Quad 4 Port USB PCI Card
Linksys NC100 v2 NIC
Western Digital 8Mb Cache SE 80Gb HD
Lite-On 52x32x52 CDR/RW
Lite-On 16x48 DVD

Current
----------
Athlon XP-A(Barton) 2600+ @ 1.91Ghz
Abit NF7-S v2.0
512Mb Kingston 3200 DDR(2.5-3-3-7)
VisionTek GeForce 4 MX 440 4x AGP w/ 64Mb DDR
User avatar
tazwegion
Veteran K6'er
Posts: 349
Joined: Sat Jun 21, 2003 11:13 am
Location: Victoria, Australia

Post by tazwegion »

punkrawker82 wrote:That doesn't mean he can't UNLOCK his celeron.... :twisted:
Yes it does :P unfortunately as the multiplier is locked within the die... little tricks that used to work with AMD processors wont work, actually the newer release AMD are locked in a similar fashion :(
(with the exception of the FX51's & Opertrons)

FSB OCing only...
Jim wrote:QDI Excellent 5. (Baby AT Slot 1 w/AGP 3xPCI 2xISA - has slocket w/ 533 celeron installed); and that one allows the multiplier to be manually set up to 8x.
Actually my MSI 6161 has that too, doesn't make a difference in the slightest though, due to the reason mentioned above...
User avatar
punkrawker82
Senior K6'er
Posts: 113
Joined: Tue Jul 29, 2003 9:06 pm

Post by punkrawker82 »

Well, that sux....and the fact that AMD is doing the same sux even worse....

Ya, I've heard the Barton XP 2500+ after week 36 of production are locked....

I was planning on getting one of those, but not if it's going to be locked.... :cry:
Past System
----------
Asus P5A-B rev1.05(Beta BIOS 1011.005)
AMD K6-2/CXT AFX @ 500Mhz(CPUCool 5 x 100)
128Mb PC100 SDRAM
VisionTek GeForce 4 MX 440 4x AGP @2x w/ 64Mb DDR
Creative Ensoniq PCI Sound Card
ADS Turbo Quad 4 Port USB PCI Card
Linksys NC100 v2 NIC
Western Digital 8Mb Cache SE 80Gb HD
Lite-On 52x32x52 CDR/RW
Lite-On 16x48 DVD

Current
----------
Athlon XP-A(Barton) 2600+ @ 1.91Ghz
Abit NF7-S v2.0
512Mb Kingston 3200 DDR(2.5-3-3-7)
VisionTek GeForce 4 MX 440 4x AGP w/ 64Mb DDR
georgep1
Veteran K6'er
Posts: 325
Joined: Tue Jul 03, 2001 6:09 pm

Re: locked

Post by georgep1 »

You can get mobile Bartons that are unlocked, and they apparently overclock like crazy.
E-Machines T6000 (AMD64 3200+) (Don't laugh! It absolutely rocks!)
GigaByte K7N400 Pro2, 3200+, 1 GB DDR, 80 GB WD SE
Epox MVPG5, K6-III+@550, 384 SDRAM, 80 GB WD SE
TX97-XE, K6-III+@400, 256 SDRAM, 40 GB WD HD
Post Reply