Compatibility List: Soyo 5XAE5 w/ i430TX

Discussion relating to Socket 7 hardware.
Post Reply
User avatar
talatalan
Newbie K6'er
Posts: 4
Joined: Fri Nov 17, 2006 8:18 pm

Compatibility List: Soyo 5XAE5 w/ i430TX

Post by talatalan » Mon Nov 20, 2006 10:03 pm

Hello,

here's some info on the K6-x compatibility of the Soyo 5XAE5 I have. I already sent this information to King V by email.

Model: Soyo 5XAE5
Chipset: Intel 430TX
Form Fact: ATX
Max FSB: 75/83
Board Rev: ? (no indication of revision on the PCB)
BIOS Req'd: 5XAE-1A7 (dated 03/03/1999)
Wrong POST: Y ("-MMX CPU at 66 MHz" for K6-2+)
Clk Util Req'd: N
Feat Util Req'd: Y (Write Allocate Monitor works here on Win 2K)

Notes:

- 83 MHz FSB runs the PCI bus way out of specs which is quite unstable.

- in contrary to the manual I could install one 256 MB SDRAM DIMM with
16 chips in slot 3, which is fully identified by the board (manual says
maximum is two 128 MB DIMMs with 16 chips in slot 2 and 3).

- CPU Support for AMD K6-x
officially: K6-2 running at max. 4.5x66=300 MHz
tested: K6-2+ running at max. 6x75=450 MHz
tested: K6-III running at max. 4x75=300 MHz
(note: The tested K6-III will not run at the documented 2.1V setting
with a higher speed. However, other K6-III/K6-III+ grades with lower
voltage or power requirements might achieve higher speeds as well)

- Latest BIOS (and manual) can be found here:
http://www.soyo.com.tw/downloads/dlmiss ... aa066a18d4

- Caution: There are also BIOSes called XAE-2A1 or similar available for
the same board, these should be for a larger BIOS Flash chip!

Best regards

Alex
'Dietrich': Athlon64 3200+, 1GB DDR-SDRAM, Uniwill MB w/ SiS755, ATI Mob. Radeon 9700
'Hicks': 2x Athlon XP 2400+, 1.5 GB DDR-SDRAM, MSI K7D Master-L w/ AMD 762, ATI Radeon 9800 Pro
'Ripley': 2x Intel PIII 1 GHz, 1 GB SDRAM, Tyan s1832DL w/ i440BX, ATI Rage 128 Pro
'Hudson': AMD K6-III 400/100, 640 MB SDRAM, Tyan s1598c2 w/ VIA MVP3, ATI Radeon 9000 AIW
'Frost': AMD K6-2+ 450/75, 256 MB SDRAM, Soyo 5XAE5 w/ i430TX, ATI Mach64

Post Reply