Flytech B58 Motherboard - any experiences?
Posted: Thu May 24, 2012 5:48 am
Hello together,
lately I digged out a mini pc with this mainboard, it uses the MVP4 chipset and supports even the K6-3 as well as 512 MB RAM... other features are IDE and mini IDE on board, 2 usable PCI slots with riser, front USB, DoC socket, LAN on board and so on...
I wanted to build in a K6-3+ but then the whole machine refuses to work, it doesn´t matter how much vcore I burn on it. With a K6-3 400 AHX it runs well but I wanted to put in an ATZ for some precious overclocking as it could reach much higher speed with lower Vcore and less heat... The BIOS says also K6-3 but I don´t get a clean system-boot... never...
So I wonder if those cpu´s are that incompatible?
Atm, the system is running with a 40 GB 3,5" IBM IDE HDD at 7200 rpm, 512 MB MT SD-RAM, a VIA-USB-2.0 card and the mentioned AHX and sucks about 24 watt in idle and nearly 40 watt under load... I thought about using a 2,5 fast notebook hdd instead to drop the power consumption again, even though I´m also playing with the idea to get a PCI grafixcard as the TridentBlade core is very, very lame...
I found parts of the manual at the net with a few jumper settings and so on but nothing more, no BIOS updates, no manuals, no drivers, nothing...
So I wonder if anyone already got his hands on such a machine?
Thanx in advance,
Eric
lately I digged out a mini pc with this mainboard, it uses the MVP4 chipset and supports even the K6-3 as well as 512 MB RAM... other features are IDE and mini IDE on board, 2 usable PCI slots with riser, front USB, DoC socket, LAN on board and so on...
I wanted to build in a K6-3+ but then the whole machine refuses to work, it doesn´t matter how much vcore I burn on it. With a K6-3 400 AHX it runs well but I wanted to put in an ATZ for some precious overclocking as it could reach much higher speed with lower Vcore and less heat... The BIOS says also K6-3 but I don´t get a clean system-boot... never...
So I wonder if those cpu´s are that incompatible?
Atm, the system is running with a 40 GB 3,5" IBM IDE HDD at 7200 rpm, 512 MB MT SD-RAM, a VIA-USB-2.0 card and the mentioned AHX and sucks about 24 watt in idle and nearly 40 watt under load... I thought about using a 2,5 fast notebook hdd instead to drop the power consumption again, even though I´m also playing with the idea to get a PCI grafixcard as the TridentBlade core is very, very lame...
I found parts of the manual at the net with a few jumper settings and so on but nothing more, no BIOS updates, no manuals, no drivers, nothing...
So I wonder if anyone already got his hands on such a machine?
Thanx in advance,
Eric