Old elf, please read!!

Discussion relating to Socket 7 hardware.
Post Reply
effigy345
Newbie K6'er
Posts: 3
Joined: Mon Jun 18, 2001 6:02 am

Old elf, please read!!

Post by effigy345 »

i posted about this in the amdzone forum, but i never got a reply from you, so i'm gonna repeat myself here. a while back you had mentioned that a couple of the clock gen chips on the 5ema+ could do an fsb of 103. could you post back to me what the dip switch settings for 103 is on those clock chips? <p></p><i></i>
Old Elf
Senior K6'er
Posts: 137
Joined: Sun Jun 03, 2001 2:13 am

Re: Old elf, please read!!

Post by Old Elf »

I'MMMM BAAAACCKKKK<br>the answer is W126H<br>and the new winbond 58A<br>W126H is.........(looking for notes)<br>"Great Caesar's Ghost!" where i put it.<br>on off on AKA (95FSB)<br>the bios on boot will say your using a 100fsb<br>but benching it will prove your at 103, also cpuid will too.<br>Dohh.<br><br>sorry I was away for awhile I'll go over to<br>the zone latter it's easyer here less post<br>to read.<br>Elf <br><br>P.S. if your goin to "Great Caesar's Ghost!" <br>with your FSB try to use the default of 3X<br>even 3x133 is only 400mhz so you can get<br>an Idea if it will work without stressing the<br>core not ALL the 3+ chips will work past 605mhz<br>6x103=618.5? <p></p><i>Edited by: <A HREF=http://pub70.ezboard.com/uoldelf.showPu ... age=EN>Old Elf</A> at: 6/19/01 1:25:20 am<br></i>
Post Reply