Attention , searchers ! Need docs : icworks W153 F

Discussion relating to Socket 7 hardware.
Post Reply
Ninho
Newbie K6'er
Posts: 18
Joined: Tue Jun 12, 2001 3:02 am

Attention , searchers ! Need docs : icworks W153 F

Post by Ninho »

Hello ! I am experimenting on my own with programming the (icworks W153F ) clock generator on my MoBo - as CPUFSB crashes with my hardware . <br><br>At Cypress internet site ( Cypress bought IcWorks ) could only find data sheets for the W153B : using this makes 'puter crash like with CPUFSB <!--EZCODE EMOTICON START :( --><img src=http://www.ezboard.com/intl/aenglish/im ... /frown.gif ALT=":("><!--EZCODE EMOTICON END--> <br><br>If anyone has got / could help me locate the CORRECT data shit - please (drop me a mail besides the) feedback here!<br><br>Thanks .<br><br>Ninho <ninho.AT.multimania.com> <p></p><i></i>
Old Elf
Senior K6'er
Posts: 137
Joined: Sun Jun 03, 2001 2:13 am

Re: Attention , searchers ! Need docs : icworks W153 F

Post by Old Elf »

try to contact computer adjusters, some times<br>he can contact direct to cypress and get thoughs<br>docs, if you are thinking on programing the BIOS.<br>I would love to know how it goes, looks like <br>I will be doing the same soon because of problems<br>on this tekram board, and also WPcreadit<br>refuses to work for me, it shows the registers ok<br>but reboots on chainging. please post on techcorner<br>for your programing chainging that way others not<br>adapt to assembly language won't get confused.<br><br>Elf<br><br> <p></p><i></i>
Ninho
Newbie K6'er
Posts: 18
Joined: Tue Jun 12, 2001 3:02 am

Re: Attention , searchers ! Need docs : icworks W153 F

Post by Ninho »

Old Elf : well thank you for you reply ! I had not noticed it yet , in fact I has - almost <!--EZCODE EMOTICON START ;) --><img src=http://www.ezboard.com/intl/aenglish/im ... s/wink.gif ALT=";)"><!--EZCODE EMOTICON END--> forgotten this post of mine here - since I made up the info I wanted by trial and error.<br><br>The FSB changes work perfectly ( with the SiS chipset and W153 ) - but I still have to make this into a proggie clean enough for distribution , which I have been to lazy ( and busy , must say ) to do for now.<br><br>So do NOT all hope abandon <!--EZCODE EMOTICON START ;) --><img src=http://www.ezboard.com/intl/aenglish/im ... s/wink.gif ALT=";)"><!--EZCODE EMOTICON END--> <p></p><i></i>
lazy_kalabok

Post by lazy_kalabok »

ok,

2007 kalabok is searching for the ic-works w124 datasheet. can someone help me to find it?
Jim
K6'er Elite
Posts: 1745
Joined: Wed Jan 21, 2004 7:10 pm
Location: Toronto

Post by Jim »

Peter once posted a link in here somewhere to a site that has datasheets, though it may not have the one you are looking for.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
Post Reply