Voodoo 4 memory mod

Discussion about systems that do not use the K6-x processors.
Post Reply
User avatar
Uranium235
Senior K6'er
Posts: 183
Joined: Mon Sep 12, 2005 9:59 pm

Voodoo 4 memory mod

Post by Uranium235 » Mon Mar 12, 2007 9:19 am

This guy took a 32MB Voodoo 4 video card and attached additional RAM chips for a total of 64MB RAM.

http://www.3dfxzone.it/enboard/topic.asp?TOPIC_ID=3653

I often wondered if it was possible to mod the L2 cache on socket 7 boards in a similar way. :)

User avatar
KachiWachi
K6'er Elite
Posts: 507
Joined: Wed Sep 21, 2005 10:53 am
Location: Pennsylvania, USA

Post by KachiWachi » Mon Mar 12, 2007 10:32 am

Sure.

Just don't forget to upgrade the TAG as well.
Moderator - Wim's BIOS

PC #1 - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), 128 MB EDO. BIOS patched by Jan Steunebrink.
PC #2 - Amptron PM-7900 (M520), i200 non-MMX, 128 MB EDO
PC #3 - HP8766C, PIII-667, 768 MB SDRAM
PC #4 - ASUS P3V4X, PIII-733, 256 MB SDRAM
PC #5 - Gateway 700X, P4-2.0 GHz, 768 MB PC800 RDRAM
PC #6 - COMPAQ Evo N1020v laptop, P4-2.4 GHz, 1 GB PC2700 DDR
PC #7 - Dell Dimension 4600i, P4-2.8 GHz, 512 MB PC2700 DDR
PC #8 - Acer EeePC netbook, Atom N270 @ 1.60 GHz, 1 GB RAM
PC #9 - ??? ;)

Post Reply