Movin on up!

Discuss software and how to tweak more performance out of your system.
Post Reply
cooliscool123
Junior K6'er
Posts: 43
Joined: Fri Nov 01, 2002 10:29 pm

Movin on up!

Post by cooliscool123 »

I used to run my K6-2 500 @ 550 (5x110) but i found out my pll and to my luck, CpuCool supports it! Now i'm running at 4.5x120 (540mhz), which is *much* faster than before, large increase in speed. Damn, i really need to take more tests. <!--EZCODE EMOTICON START :) --><img src=http://www.ezboard.com/intl/aenglish/im ... /smile.gif ALT=":)"><!--EZCODE EMOTICON END--> <br><br>Go <!--EZCODE LINK START--><a href="http://www.ngemu.com/forums/attachment. ... <!--EZCODE LINK END--> For a pic in Wcpuid. <!--EZCODE EMOTICON START :) --><img src=http://www.ezboard.com/intl/aenglish/im ... /smile.gif ALT=":)"><!--EZCODE EMOTICON END--> <p></p><i>Edited by: <A HREF=http://pub70.ezboard.com/bk6plus67153.s ... cool123</A> at: 11/18/02 7:43:49 pm<br></i>
cooliscool123
Junior K6'er
Posts: 43
Joined: Fri Nov 01, 2002 10:29 pm

Re: Movin on up!

Post by cooliscool123 »

<!--EZCODE LINK START--><a href="http://www.ngemu.com/forums/attachment. ... 353896">My Cpu Temp</a><!--EZCODE LINK END--> (In Farenheit) <!--EZCODE EMOTICON START :ninja --><img src=http://www.k6plus.com/siteart/emoticons/ninja1.gif ALT=":ninja"><!--EZCODE EMOTICON END--> <p></p><i></i>
User avatar
Nohr
Nohrmal
Posts: 739
Joined: Sat Jun 02, 2001 8:26 pm
Contact:

Re: Movin on up!

Post by Nohr »

Very nice! I could never get over 112. <!--EZCODE EMOTICON START :) --><img src=http://www.ezboard.com/intl/aenglish/im ... /smile.gif ALT=":)"><!--EZCODE EMOTICON END--> <p>-=-=-=-=-=-=-=-=-=-=-=-=-<br>Athlon Thunderbird 1GHz@1.35GHz (9x150)<br>Iwill KK266<br>256MB Crucial PC133 CAS2 5-2-2<br>Gainward GeForce3 Ti200 4ns 231/524<br>Gateway EV910 19" monitor (1600x1200 .26mm)<br>Western Digital WD800JB 80GB 7200rpm<br>Lite-On 24/10/40x CD-RW ~ Toshiba 16/48x DVD-ROM<br>Windows XP Professional</p><i></i>
cooliscool123
Junior K6'er
Posts: 43
Joined: Fri Nov 01, 2002 10:29 pm

Sandra2K3

Post by cooliscool123 »

Heh, thanks Nohr. <!--EZCODE EMOTICON START ;) --><img src=http://www.ezboard.com/intl/aenglish/im ... s/wink.gif ALT=";)"><!--EZCODE EMOTICON END--> <br><br>Go <!--EZCODE LINK START--><a href="http://www.ngemu.com/forums/attachment. ... <!--EZCODE LINK END--> for my Sandra2003 arithmatic scores (4.5x120fsb). <!--EZCODE EMOTICON START :p --><img src=http://www.ezboard.com/intl/aenglish/im ... tongue.gif ALT=":p"><!--EZCODE EMOTICON END--> <p></p><i>Edited by: <A HREF=http://pub70.ezboard.com/bk6plus67153.s ... cool123</A>  <IMG HEIGHT=10 WIDTH=10 SRC="http://www.greatdave.org:7777/filgaia/r ... arappa.gif" BORDER=0> at: 11/19/02 6:06:41 pm<br></i>
User avatar
blue
Site Admin
Posts: 1047
Joined: Mon Jun 04, 2001 2:37 pm
Location: Sacramento
Contact:

heh

Post by blue »

I had 124mhz fsb, I guess anything over 112 is a free pass to the 31337 H@X0r club :P <p></p><i></i>
p3 1ghz laptop
geforce2 go
256mb ram
User avatar
jsc1973
Veteran K6'er
Posts: 394
Joined: Sat Jun 09, 2001 11:55 am
Contact:

...

Post by jsc1973 »

K6-2 Classic chips at high speeds are just starved for cache and memory bandwidth. Any increase in the FSB is a significant gain in performance on those chips. I bet you're 15 percent faster in real-world performance with 10 less MHz. <p></p><i></i>
FIC VA-503+, Rev. 1.2, AMD K6-III+ 450@550MHz, 80GB Seagate ATA-100, 3dfx Voodoo3 3500 TV, TB Montego II Quadzilla, Win98se, 384MB PC100

Compaq Presario 1273, AMD K6-III+ 450@400MHz 1.8v, 40GB Samsung 5400RPM, extremely hacked Win98SE, 288 (yes, 288!) MB RAM
(Also an AMD FX-8350, which does the heavy lifting these days...)
Post Reply