K6Speed Programs
-
- Senior K6'er
- Posts: 139
- Joined: Tue Apr 05, 2005 3:25 pm
- Location: Florida, USA
K6Speed Programs
What is the difference between the two K6Speed programs in the DOWNLOADS section?
RE: K6Speed Programs
You got me. The newer one, (which just to confuse things, was the first one posted), only has one file. The older one, which was posted later, has several files, (and works!! - I use it). It can enable write Allocate, and Write combining, as well as adjust the CPU speed by changing the multiplier.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
k6speed
The notes on the d/l page indicate what is changed/fixed in the .88 version of k6speed, essentially, the bug fixes related to non-"+" CPUs.
Version 0.87 works fine for all "+" CPUs.
The date the files were made available for d/l is irrelevant.
Kyle
k6speed and k6dos author
kylesb@comcast.net (if ya need to communicate directly with me)
Version 0.87 works fine for all "+" CPUs.
The date the files were made available for d/l is irrelevant.
Kyle
k6speed and k6dos author
kylesb@comcast.net (if ya need to communicate directly with me)
-
- Senior K6'er
- Posts: 139
- Joined: Tue Apr 05, 2005 3:25 pm
- Location: Florida, USA
Kyle,
Thanks for your answer.
I have several SS7 motherboards and use both the K6-III "plus" and "non-plus" CPUs.
In order to use the .88 version with the "non-plus" CPUs, do I first install .87 version (and run its exe file) and then install/run the .88 version exe file? Or do I just unzip the .87 version (not running its exe file), and then run the .88 version exe file?
Thanks for your answer.
I have several SS7 motherboards and use both the K6-III "plus" and "non-plus" CPUs.
In order to use the .88 version with the "non-plus" CPUs, do I first install .87 version (and run its exe file) and then install/run the .88 version exe file? Or do I just unzip the .87 version (not running its exe file), and then run the .88 version exe file?
Kyle doesn't drop by very often, so I'll tell you what he told me. You unzip the 87 version, then overwrite the 88 version exe file on top of the 87 version. The 88 version uses the same additional files that the 87 version has.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
-
- Senior K6'er
- Posts: 139
- Joined: Tue Apr 05, 2005 3:25 pm
- Location: Florida, USA
The 88 version works w/ all K62 & 3 Processors, + or not. It is the 87 version that has problems w/ non + processors. And yes, you just overwrite the 88 exe on top of the 87 exe, (keeping the other 87 files, which the 88 needs), then you are set to go.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
-
- Senior K6'er
- Posts: 139
- Joined: Tue Apr 05, 2005 3:25 pm
- Location: Florida, USA
- KachiWachi
- K6'er Elite
- Posts: 507
- Joined: Wed Sep 21, 2005 10:53 am
- Location: Pennsylvania, USA
Good thing I know diddley squat about "Write Combining" and never seriously tried to get it to work.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card