Tyan Trinity 1598C2 Boards!
Tyan Trinity 1598C2 Boards!
Hi,
I am Mitsubishi0uk@hotmail.com, owner of several of the above board!!!
I have a stack left which are completely mint sitting here! (In fact I have a large unopened Tyan box which has 20 in for a start!)
I know that some of you guys have bought from me in the past and I am still looking to get rid of them , preferably all at once!! (Or at least a large number at once)
Any tips on how and who to sell these to would be most appreciated.
The main problem I have is shipping charges, which tend to be more than the board!!
Thanks
Mitsubishi0uk
I am Mitsubishi0uk@hotmail.com, owner of several of the above board!!!
I have a stack left which are completely mint sitting here! (In fact I have a large unopened Tyan box which has 20 in for a start!)
I know that some of you guys have bought from me in the past and I am still looking to get rid of them , preferably all at once!! (Or at least a large number at once)
Any tips on how and who to sell these to would be most appreciated.
The main problem I have is shipping charges, which tend to be more than the board!!
Thanks
Mitsubishi0uk
- thetempleoflove
- Junior K6'er
- Posts: 43
- Joined: Tue Jun 19, 2001 11:43 am
- Location: Bicester, Oxford, U.K.
Hey Jim
Hi, are you saying that you are getting a webpage "isurfplus"?
If I click on Mitsubishi0uk@hotmail.com my e-mail client opens a blank e-mail addressed to Mitsubishi0uk
Perhaps there is a setting you can change.
Cheers,
Ges.
P.S. I bought two, they are a great board. However if you're not in UK it must be expensive.
If I click on Mitsubishi0uk@hotmail.com my e-mail client opens a blank e-mail addressed to Mitsubishi0uk
Perhaps there is a setting you can change.
Cheers,
Ges.
P.S. I bought two, they are a great board. However if you're not in UK it must be expensive.
- thetempleoflove
- Junior K6'er
- Posts: 43
- Joined: Tue Jun 19, 2001 11:43 am
- Location: Bicester, Oxford, U.K.
Oh Yeah...
Hi Again
Does anyone know how I can tell which is which on the USB jumper? I want to connect the case which has the wires to the jumper on the mobo so I have USB at the front.
Many thanks if you can reply,
Ges.
Does anyone know how I can tell which is which on the USB jumper? I want to connect the case which has the wires to the jumper on the mobo so I have USB at the front.
Many thanks if you can reply,
Ges.
- thetempleoflove
- Junior K6'er
- Posts: 43
- Joined: Tue Jun 19, 2001 11:43 am
- Location: Bicester, Oxford, U.K.
He gave you guys his email, he doesn't stop by very often, If you are interested contact him. The boards are new, he has at least an unopened case of 20. They are ATX boards in case anyone doesn't know, (Don Pedro does know obviously); and I don't know what they come with. All that assuming he still has them; because that is a fairly old post.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
If anyone was curious about the spec's and were unable with the usual google search to locate anything useful... full spec's can be found here @ Trinity-ATX
Hmmm... also looking @ the C2's spec sheet it tops out @ 100Mhz (fsb) on a VIA MVP3 chipset?
My curiousity got the better of me... I emailed him too
Hmmm... also looking @ the C2's spec sheet it tops out @ 100Mhz (fsb) on a VIA MVP3 chipset?
My curiousity got the better of me... I emailed him too
Yeah, Like a DFI, you have to use software to OC it. No settings on board or Bios for that purpose. I seem to recall they are 2 Meg boards though.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card