Not familiar w/ clockgen. Assuming it allows you to reset the FSB through software, CPU Cool does that, and a lot more. K6Speed allows you to reset the multiplier and enable write allocation. Both can be setup to enable predetermined settings at boot.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
thanks for that tip Jim, cpu cool looks pretty slick. It even managed to control fsb on my Nforce3. I have to figure out which temps are what. Is it worth paying for the upgrade on cpu cool?
YES!!! - Otherwise you have to manually reenable your settings at boot every time. Only the lisenced version allows you to preconfigure. It is cheap; and you are legally allowed to use it on as many machines as you have.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
@ The EMP : Further to what I said already about CPU Cool being worth the 15 Euros and change, it also gives you quite detailed info about your RAM. The unregistered version does that too; but not as fully as the registered version does. If you understand what it tells you, (and I must confess that I don't completely), you can figure out exactly what tweaks your RAM will support.
Also, you mentioned that : "I have to figure out which temps are what." If you do, please let me know, because I am getting a reading on "Temp sens 0" ranging from 43.5C up to 45C; and I would like to know what the heck it is!
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
I guess I'll take a peek at motherboard monitor and speedfan to see if they can help me play the matching game, otherwise it's move a fan around and see what cools off time