ridiculous things with mvp3

Discuss software and how to tweak more performance out of your system.
DonPedro
K6'er Elite
Posts: 578
Joined: Wed Jul 27, 2005 2:11 pm

Post by DonPedro »

socket7!,

just in case you find a place where such a "decoupler" - thing is available please post! I am interested ....
socket7!
Newbie K6'er
Posts: 15
Joined: Sun Jun 10, 2007 4:18 pm

Post by socket7! »

I'm sorry, but i did not find time today to do additional benches. I hope to do it tommorow. I enclose a a small pic of super pi @4.30.

The system is not perfectly stable, but I'm working on it.

And a note about silent serpent: I'm hunting for it for 2 years already. No luck so far :-( .

and just a very quick question: is esdram or hsdram compatible with any socket7 system? I know that vcsdram is not (I tested it).
Attachments
pi @ 620 max.jpg
pi @ 620 max.jpg (120 KiB) Viewed 17896 times
...CPU-z showing 620MHz
...CPU-z showing 620MHz
pi @620 _4_30_439.jpg (120.96 KiB) Viewed 17896 times
Jim
K6'er Elite
Posts: 1745
Joined: Wed Jan 21, 2004 7:10 pm
Location: Toronto

Post by Jim »

Re your "Silent Serpant", that reminds me of a "Power Supply" that I built from a kit several years ago. Thing had output voltage that fluctuated quite a bit, so I designed my own smoothing system for it.

Basically when you take AC current and use a bridge rectifier to convert it to DC, the resultant output wave looks something like this :

Image

Adding a smoothing capacitor changes the form of the wave to something like this :

Image

What I did was say ok, if adding a smoothing capacitor reduces the ripple; but still leaves some ripple because of "Rise Time", (of the capacitor current), and "Fall Time", (of the capacitor current); what would happen if I put a series of capacitors across the output wherein each succeeding capacitor in the series was 1/2 the value of the preceeding one; with the series running right down to the Picofarad range. I forget how many caps I used, somewhere between 15 & 20 as I recall. The concept was that each succeding smaller cap would fill in the gap, (ripple) caused by the rise time and fall time of the preceeding cap. EG :

Image

KachiWachi knows a whole lot more about this sort of thing than I do, as to how valid my idea was; but this I can tell you : That power supply went from having an output that drifted up and down by as much as 2 or 3 tenths of a volt to being absolutely stable as far as my multimeter could measure. - 1/100 of a volt.

Wonder if the concept could be applied to the CPU power supply ?

EDIT : No Response whatsoever to this post; so I guess I'll have to try it with one of the three 300 watt Antec AT supplys that I bought. Of course since nobody cares, there will be no point in posting the results.
Last edited by Jim on Sat Aug 25, 2007 12:45 pm, edited 5 times in total.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
User avatar
cskamacska
Newbie K6'er
Posts: 11
Joined: Sun Jul 01, 2007 1:19 pm
Location: Hungary - Budapest

ridiculous things with mvp3

Post by cskamacska »

socket7! wrote:I know that vcsdram is not (I tested it).
Whoah, VCSDRAM? If I may ask you, where did you find that kind of memory? I have been looking for vcsdram a long time now, but could not find any. :?
Did you experience any performance gain from using VC SDRAM?
User avatar
kalabok
Senior K6'er
Posts: 147
Joined: Mon Nov 06, 2006 11:40 am
Location: germany

Post by kalabok »

4:30 with 112 fsb ... wow. best performance i have ever seen.

btw - my record till now is 4:27 with 133 fsb on ali7.

greetz from dubrovnik
Jim
K6'er Elite
Posts: 1745
Joined: Wed Jan 21, 2004 7:10 pm
Location: Toronto

Post by Jim »

Actually he was running 124 Mhz FSB.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
socket7!
Newbie K6'er
Posts: 15
Joined: Sun Jun 10, 2007 4:18 pm

Post by socket7! »

I'm leaving for holidays tonight, and as a result, I will not be able to post new benchmarks until 4th.

Info for cskamacska: I bought vcsdram last year from the guy that didn't now what he sells. I would recommend to visit a good Polish auction site: www.allegro.pl.
User avatar
kalabok
Senior K6'er
Posts: 147
Joined: Mon Nov 06, 2006 11:40 am
Location: germany

Post by kalabok »

jup,

sorry for my first statement, it is 124fsb indeed. still a very good result!
i would be very interested to see the superpi result with no l3 enabled.
socket7!
Newbie K6'er
Posts: 15
Joined: Sun Jun 10, 2007 4:18 pm

Post by socket7! »

just a small update:

my mem scores with everest 2.2 are (read/write/latency):
@616: 352/89/203.3
@624: 390/99/193,4

scores are not comparable with different version of everest.

I also managed to get 4.36.427 in SuperPi, but @616, L3off and wpcredit tweaks.
DonPedro
K6'er Elite
Posts: 578
Joined: Wed Jul 27, 2005 2:11 pm

Post by DonPedro »

socket7,

now that you managed to run the benches with version 2.20 it is far more easy to rank your setup: your mem-write scores seem to be abnormally low especially if we take into consideration that you run your system with overclocked fsb-speed.

I also see with astonishment that everest-numbers "obviously" don't need to be in line with good (low) super-pi numbers.

strange ...
Jim
K6'er Elite
Posts: 1745
Joined: Wed Jan 21, 2004 7:10 pm
Location: Toronto

Post by Jim »

He did say that he doesn't use Write Allocate.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
DonPedro
K6'er Elite
Posts: 578
Joined: Wed Jul 27, 2005 2:11 pm

Post by DonPedro »

@jim

the more it is interesting because superpi depends heavily on memory performance and constantly read/writes to the memory to build its outcome. still super7's system manages to pass super-pi at blazzing speed.
User avatar
Stedman5040
Veteran K6'er
Posts: 271
Joined: Mon Sep 05, 2005 4:22 pm

Post by Stedman5040 »

Haven't got to sub 4m30s yet. Got the Epox MVP3G2 up and running at 617MHz (5.5x112) with 384 Mb of CL2 Hynix ram @ 2-2-2-5 with wpcredit settings. WA on and 1Mb L3 cache on

Everest 2.20 MR/MW/ML 332/173/193.5
Sandra 2004 Memory Bandwidth 226/224
Superpi 1M 4m33s

So so close. Maybe 115fsb and 632MHz will crack it if I can get there with this K6-III+/450

Stedman :)
socket7!
Newbie K6'er
Posts: 15
Joined: Sun Jun 10, 2007 4:18 pm

Post by socket7! »

I did some more benches today, so here they are (everest 2.2):

the following are with L3 cache enabled and @616MHz:

- no wpcredit tweaks, no Write Allocate:
288/87/241,9

- no wpcredit tweaks, Write Allocate enabled:
288/140/241,4

- wpcredit tweaks, Write Allocate enabled:
290/162/239,1

and now with L3 cache off and still @616MHz:

- no wpcredit tweaks, no Write Allocate:
287/87/242,7

- no wpcredit tweaks, Write Allocate enabled:
288/139/241.8

- wpcredit tweaks, Write Allocate enabled:
348/179/203,0

That score is signifficantly higher, because of offset 6C set to 08. I can't do it with L3 cache on.

and now interesting part: disabling Data Prefetch (I use CPUCool instead if K6speed) lowered latency score in everest (WA disabled):

291/127/130

and two benches done @624 (for obvious reasons with L3 off)

- wpcredit tweaks, WA enabled:
390/168/183,4

- wpcredit tweaks, WA disabled:
390/99/183/4

- and again both dataprefetch and Write Allocate are disabled:
326/99/118,3

I was surprised to see latency @118.3, so I decided to check Super Pi again. Screen is below

I don't think there is much room for further improvements here. My FIC 503A doesn't offer FSB higher then 124 so I'm stuck @624 maximum. What I'm going to look at now, is how to reduce mem latency.
Attachments
pi @624 datapref and WA off.jpg
pi @624 datapref and WA off.jpg (126.44 KiB) Viewed 17668 times
Jim
K6'er Elite
Posts: 1745
Joined: Wed Jan 21, 2004 7:10 pm
Location: Toronto

Post by Jim »

It would seem then what is critical for good results in "SuperPi" is not high memory read and write speed, but low latency; which opens the question of : What is SuperPi measuring? Is whatever it is important for good overall performance? Is Memory Read and Write speed important for overall performance? Which is more important to good overall performance, (not just in "SuperPi but in general usage) : read and write, or latency?

NOTE : I Don't have SuperPi, and have never used it, so I know nothing about it. If it relates to calculating the value of Pi then I suspect it is a highly artifical benchmark for most purposes other than intermidable number crunching.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
Post Reply