WPCredit as applied to a DFI K6BV3+/66

Discuss software and how to tweak more performance out of your system.
User avatar
KachiWachi
K6'er Elite
Posts: 507
Joined: Wed Sep 21, 2005 10:53 am
Location: Pennsylvania, USA

Post by KachiWachi »

Just a general comment here.

It would be nice if everyone elaborated on the "tweaks" that are applied.

For example, tell us what the setting is for, what the "default" setting is, what your "normal" setting is, and then what your "tweak" is.

Otherwise...this data is meaningless.

Thanks.
Moderator - Wim's BIOS

PC #1 - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), 128 MB EDO. BIOS patched by Jan Steunebrink.
PC #2 - Amptron PM-7900 (M520), i200 non-MMX, 128 MB EDO
PC #3 - HP8766C, PIII-667, 768 MB SDRAM
PC #4 - ASUS P3V4X, PIII-733, 256 MB SDRAM
PC #5 - Gateway 700X, P4-2.0 GHz, 768 MB PC800 RDRAM
PC #6 - COMPAQ Evo N1020v laptop, P4-2.4 GHz, 1 GB PC2700 DDR
PC #7 - Dell Dimension 4600i, P4-2.8 GHz, 512 MB PC2700 DDR
PC #8 - Acer EeePC netbook, Atom N270 @ 1.60 GHz, 1 GB RAM
PC #9 - ??? ;)
User avatar
Steven67
Junior K6'er
Posts: 27
Joined: Sat Dec 13, 2008 10:59 pm

My new Ram read score on DFI K6BV3+/66 - K6-3+ ATZ

Post by Steven67 »

Hello, Jim

do you remember our discussion about my 'read ram score' , this is a new one ;)

Image

I got a new Voodoo5 as you can see.
K6-3E+ ATZ /400 @600 Mhz (120*5)
DFI K6BV3+/66 rev B1 / 512 Ko L3
768 Go ram
3Dfx VooDoo5 5500
Hd WD 80Go Ide / Dvd Rom LG
Usb 2.0 / Fast Ethernet / Windows 7
Jim
K6'er Elite
Posts: 1745
Joined: Wed Jan 21, 2004 7:10 pm
Location: Toronto

RE: My new Ram read score on DFI K6BV3+/66 - K6-3+ ATZ

Post by Jim »

Haven't seen that version of Everest before; but if your "memory read" score is now 581, THAT is VERY impressive!! How did you do it ?
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
User avatar
Stedman5040
Veteran K6'er
Posts: 271
Joined: Mon Sep 05, 2005 4:22 pm

Post by Stedman5040 »

look at the P5A reference cpu two lines below his score with the aladdinV chipset with memory at 66Mhz!!. I would say that you need to check the read score using Everest Home 2.20. Further down the list it gives a score of 128 for the MVP3 chipset on a Epox MVP3GM board with memory at 100Mhz. Clearly there is something amiss here with the benchmark program.

Stedman
Post Reply