Temperature Monitoring
Temperature Monitoring
"Q" Gentlemen : If you had figured out a way, (strictly a hardware solution, - no software involved), to allow you to monitor the temperatures of as many as a dozen different things inside a machine; what would you choose to monitor?
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
hi jim,
got your pm.
mmmh, I am a little bit confused about what you are really talking about here ..... you got me on the wrong foot (as we say in austria). so maybe my answer sounds a little bit off track but I would like to know fan speed, cpu temp, fsb and total cpu speed.
hope my answer goes the right direction ...
got your pm.
mmmh, I am a little bit confused about what you are really talking about here ..... you got me on the wrong foot (as we say in austria). so maybe my answer sounds a little bit off track but I would like to know fan speed, cpu temp, fsb and total cpu speed.
hope my answer goes the right direction ...
Partly Peter, I was speaking soley about temperatures though. i.e. what things, (up to 12 max), would you like to keep an eye on their temperatures? e.g. CPU temp; HDD temp; Ram Temp? PLL Temp; Ambient Case temp? Chipset temp? etc.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
- KachiWachi
- K6'er Elite
- Posts: 507
- Joined: Wed Sep 21, 2005 10:53 am
- Location: Pennsylvania, USA
I would add air inlet and outlet temp (assuming you can set this up in your case), since this will determine the overall cooling "effort" to begin with.
Remember...fans do not cool the air...they just move it.
Remember...fans do not cool the air...they just move it.
Moderator - Wim's BIOS
PC #1 - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), 128 MB EDO. BIOS patched by Jan Steunebrink.
PC #2 - Amptron PM-7900 (M520), i200 non-MMX, 128 MB EDO
PC #3 - HP8766C, PIII-667, 768 MB SDRAM
PC #4 - ASUS P3V4X, PIII-733, 256 MB SDRAM
PC #5 - Gateway 700X, P4-2.0 GHz, 768 MB PC800 RDRAM
PC #6 - COMPAQ Evo N1020v laptop, P4-2.4 GHz, 1 GB PC2700 DDR
PC #7 - Dell Dimension 4600i, P4-2.8 GHz, 512 MB PC2700 DDR
PC #8 - Acer EeePC netbook, Atom N270 @ 1.60 GHz, 1 GB RAM
PC #9 - ???
PC #1 - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), 128 MB EDO. BIOS patched by Jan Steunebrink.
PC #2 - Amptron PM-7900 (M520), i200 non-MMX, 128 MB EDO
PC #3 - HP8766C, PIII-667, 768 MB SDRAM
PC #4 - ASUS P3V4X, PIII-733, 256 MB SDRAM
PC #5 - Gateway 700X, P4-2.0 GHz, 768 MB PC800 RDRAM
PC #6 - COMPAQ Evo N1020v laptop, P4-2.4 GHz, 1 GB PC2700 DDR
PC #7 - Dell Dimension 4600i, P4-2.8 GHz, 512 MB PC2700 DDR
PC #8 - Acer EeePC netbook, Atom N270 @ 1.60 GHz, 1 GB RAM
PC #9 - ???
Wha Dat??
Yeah, I know about the various bay fillers that offer fan controls and a couple of temp sensors. Got one for Superpuppy-3 in fact. Thing is with only a couple of temp sensors you could be missing something important. --- Soooo,
Wha Dat?
Well the item on the right is an enlarged view, (plug on left for scale), of a "Greyhill" miniature 10 position rotary switch. Have a couple of them that I bought years ago, for model building, that I never did use.
Seemed to me that if instead of running the wires to both thermal sensors direct; I could, say, put one on the processor and run it direct; but run the second one through the "Greyhill", w/ 10 separate sensors attached on the output side. Then just switch from one to another to monitor temps for up to 10 items that way.
Question was : What ten items do I monitor? - Assuming Pat @ Uptown can find those extra sensors he has salted away.
Wha Dat?
Well the item on the right is an enlarged view, (plug on left for scale), of a "Greyhill" miniature 10 position rotary switch. Have a couple of them that I bought years ago, for model building, that I never did use.
Seemed to me that if instead of running the wires to both thermal sensors direct; I could, say, put one on the processor and run it direct; but run the second one through the "Greyhill", w/ 10 separate sensors attached on the output side. Then just switch from one to another to monitor temps for up to 10 items that way.
Question was : What ten items do I monitor? - Assuming Pat @ Uptown can find those extra sensors he has salted away.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
RE: Wha Dat??
K, got the sensors. Now where do I put them? Not including the CPU, any 10 places?
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
Temp monitoring
Gfx card
Northbridge
Cache chip
Air intake temp
Exhaust temp
PSU
HDD
Would be my choice..
Northbridge
Cache chip
Air intake temp
Exhaust temp
PSU
HDD
Would be my choice..
Thanks Cake. Notice you did not include the PLL. That Oversight? beirn_3 said that his got pretty hot when he OCed up to 690Mhz. Of course I've never tried anything like that, but I have noticed mine gets uncomfortably warm @ 112 FSB.
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
K, thanks. Now about the 12th sensor. That one comes w/ the chassis fan, and is used to regulate its speed. It does not give a temp readout, simply raises the chassis fan speed as the temp goes up. I was thinking of sticking that one on the back of my video card opposite the chip. That seems to get about as hot as anything does in there. Yet because of what appears to be solder tag spots, (holes w/ metal circles surrounding them), which seem to be common to those on the other side of the board, I can't put any kind of conductive surface, (heatsink), there; unless I put a piece of mica in between.
Suggestions?
Suggestions?
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
Well actually I'd like to stick a heatsink there, and the sensors look like this :
They are flat, very thin, and flexible. I don't know their correct technical name.
But the real issue is : Is that the best place for that particular sensor?
They are flat, very thin, and flexible. I don't know their correct technical name.
But the real issue is : Is that the best place for that particular sensor?
Superpuppy 3
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card
K6-3+ 450 ACZ (6x100)
DFI K6BV3+/66 Rev B2 (2 Meg) w/ 2x28mm Chipset Fans
2x256 Meg PC 133 Hynix SDRAM
1x 20G Maxtor (7200)
2x 80G Maxtor (7200) Ducted w/ 2x486 Fans Mount
52/24/52/16 LG CDR/RW/DVD
8/4/3/12/24/16/32 LG Super Multi
ATI 9000 aiw Radeon AGP
SB Audigy 1 MP3 Sound
CMD 649 IDE Controller
NEC USB 2 Card