PCCHIPS M599LMR Test

Discussion relating to Socket 7 hardware.
Post Reply
duncan
Newbie K6'er
Posts: 4
Joined: Sun Apr 29, 2018 10:24 am

PCCHIPS M599LMR Test

Post by duncan » Mon May 07, 2018 2:59 am

Hi,

just to give an impression of my actual projects:

I did find this mainboard short time ago, searching for mobos with SIS-chipsets. It has a FSB of 100, a horrible integratet AGP-solution with max. 8MB shared(!!) memory and, the absolute nonsense, a cacheable area of gigantic :shock: 64MB.

The solution was, of course, to put in one of my AMD K6III+/400. Graphic card I choose a newly found 3DLabs Oxygen VX1, just to see how far that one goes :lol:

So here we have some benchmark results:

speedsys 478:
SIS530sst.jpg
SIS530sst.jpg (100.28 KiB) Viewed 899 times
SiSoftSandra2002:
530San1.jpg
530San1.jpg (108.45 KiB) Viewed 899 times
530San2.jpg
530San2.jpg (106.74 KiB) Viewed 899 times

...it seems, I can put only three pics into the post. So here we go...

duncan
PVI-486SP3/Cx5x86-100/Mystique4MB - P55T2P4/K6/2-400/SynergyIIPCI32MB - ABIT BH6/PIII-900/GF2TI32MB

duncan
Newbie K6'er
Posts: 4
Joined: Sun Apr 29, 2018 10:24 am

Re: PCCHIPS M599LMR Test

Post by duncan » Mon May 07, 2018 3:06 am

...and here we go on ;-)
530San3.jpg
530San3.jpg (119.38 KiB) Viewed 898 times
530_3D.jpg
530_3D.jpg (94.39 KiB) Viewed 898 times
As one can see, the K6III+ and the mainboard act as expected - on level with PII in speedsys, not really bad in Sandra.

The complete breakdown happens in 3DMark99 with the Oxygen. During the test, the "Race" - part went okay - but in "1st Person" it completely sagged down. Not being made for playing, that´s okay. And the filtering quality was quite good.

This is just a little "teaser" for what to come from me, maybe someone enjoys it.

Greetings duncan
PVI-486SP3/Cx5x86-100/Mystique4MB - P55T2P4/K6/2-400/SynergyIIPCI32MB - ABIT BH6/PIII-900/GF2TI32MB

DonPedro
K6'er Elite
Posts: 575
Joined: Wed Jul 27, 2005 2:11 pm

Re: PCCHIPS M599LMR Test

Post by DonPedro » Sun May 27, 2018 7:39 am

You will find a lot of information how to get the best out of a SiS530 board from another thread at k6plus here.

the discussion will start from getting it work at all to 133mhz fsb, setting up of bios and chipset registers (from within windows via wpcredit/set -tool) to finally reach 600mhz cpu, 400mb/s memory read speed.

happy trying!
:)

duncan
Newbie K6'er
Posts: 4
Joined: Sun Apr 29, 2018 10:24 am

Re: PCCHIPS M599LMR Test

Post by duncan » Sun May 27, 2018 10:51 am

Hi @DonPedro,

thanks for taking some interest :D

a really great thread - but the mainboards used there are faaaar away from a PCCHIPS, I´d say.

I was looking for something better than what I got, but nobody seems to care about SIS of those days, so nobody replied to my search requests (in german forums "Dos reloaded", my <homebase>, and "dosforum").

I´ve got a PCCHIPS 570 (SIS5595) as well, which doesn´t go up to 100FSB, but is fun at 75 - with a decent AGP, cacheable area of 256MB "out of the box" aso. The k6-2/500 running easily along with 6x75=450 at 2.0V 8)

greetings duncan
PVI-486SP3/Cx5x86-100/Mystique4MB - P55T2P4/K6/2-400/SynergyIIPCI32MB - ABIT BH6/PIII-900/GF2TI32MB

DonPedro
K6'er Elite
Posts: 575
Joined: Wed Jul 27, 2005 2:11 pm

Re: PCCHIPS M599LMR Test

Post by DonPedro » Sun May 27, 2018 5:04 pm

your pcchips mainboard has the sis530 chipset so everything related to this chipset is vaild for your system too.
don't be shy ...

Post Reply