loggin in
can't edit
Since I can't stay logged in long enough to edit I'm having to reply to my own topic. It seems it is just this site on this computer. My two other computers don't have this problem and this computer is OK at all other forums. Any ideas? <p></p><i></i>
Re: loggin in
It's happened to me and others before as well. Then after a while it just seemed to start working again.. <p>-=-=-=-=-=-=-=-=-=-=-=-=-<br>Athlon Thunderbird 1GHz@1.35GHz (9x150)<br>Iwill KK266<br>256MB Crucial PC133 CAS2 5-2-2<br>Gainward GeForce3 Ti200 4ns 231/524<br>Gateway EV910 19" monitor (1600x1200 .26mm)<br>Western Digital WD800JB 80GB 7200rpm<br>Lite-On 24/10/40x CD-RW <b>|</b> Toshiba 16/48x DVD-ROM<br>Windows XP Professional</p><i></i>
Re: loggin in
Apparently, according to EZboard, the source of the login problem is IE6-SP1, the latest high security version of Internet Explorer. They are suggesting that I set IE's security settings to zero. I DON'T THINK SO. This, however, is not a complaint about inane advice but rather a warning about SP1. My experieces with removing or replacing IE with an older version have not been pleasant. I'm going to lodge my complaint at msnews and then I'm going to load some browser other than Netscape. Any suggestions?<br> <p></p><i></i>
Re: loggin in
Only problem with that theory is that I've got IE6 SP1 and I haven't had any problems recently.<br><br>Could try Mozilla. People seem to like it. <p>-=-=-=-=-=-=-=-=-=-=-=-=-<br>Athlon Thunderbird 1GHz@1.35GHz (9x150)<br>Iwill KK266<br>256MB Crucial PC133 CAS2 5-2-2<br>Gainward GeForce3 Ti200 4ns 231/524<br>Gateway EV910 19" monitor (1600x1200 .26mm)<br>Western Digital WD800JB 80GB 7200rpm<br>Lite-On 24/10/40x CD-RW <b>|</b> Toshiba 16/48x DVD-ROM<br>Windows XP Professional</p><i></i>
Re: loggin in
I myself use Opera for much of my daily surfin'<br><br>Got a few quirks, but generally really nice to handle.. <p>-------------------------------------------<BR>K6-III+ 450 @ 580 (105 x 5.5) on a Gigabyte GA-5AX rev5.2<BR>386 MB Generic PC133 RAM (cas2), 15 GB Quantum Fireball LCT + 60 GB Seagate Cuda IV<BR> Radeon 8500LE, 3C905 NIC<BR>SB Live! Value w/ homemade digital I/O card<BR>Sony CRX0811 CD-RW burner | Asus 40x CDROM<BR></p><i></i>
XP-M 2400+ @ 10x220, Epox 8RDA3+
512 MB PC3200 KingMax
15 GB Quantum Fireball LCT + 60 GB Seagate Barracuda IV
Radeon 8500LE
512 MB PC3200 KingMax
15 GB Quantum Fireball LCT + 60 GB Seagate Barracuda IV
Radeon 8500LE
Re: loggin in
Nohr- What's your privacy setting for the internet zone? <p></p><i></i>
Re: loggin in
Says Custom. Think it changes to that if you change stuff in the Advanced tab.. It's certainly higher than zero though. <p>-=-=-=-=-=-=-=-=-=-=-=-=-<br>Athlon Thunderbird 1GHz@1.35GHz (9x150)<br>Iwill KK266<br>256MB Crucial PC133 CAS2 5-2-2<br>Gainward GeForce3 Ti200 4ns 231/524<br>Gateway EV910 19" monitor (1600x1200 .26mm)<br>Western Digital WD800JB 80GB 7200rpm<br>Lite-On 24/10/40x CD-RW <b>|</b> Toshiba 16/48x DVD-ROM<br>Windows XP Professional</p><i></i>
Re: loggin in
You were right Nohr. It just went away. I have a real hard time with things that are not explainable. <p></p><i></i>
Re: loggin in
Well now today I had to log myself in once and now when I try to 'mark forum read' it takes me to a blank page that just says "not authorized". Weeeee.. <p>-=-=-=-=-=-=-=-=-=-=-=-=-<br>Athlon Thunderbird 1GHz@1.35GHz (9x150)<br>Iwill KK266<br>256MB Crucial PC133 CAS2 5-2-2<br>Gainward GeForce3 Ti200 4ns 231/524<br>Gateway EV910 19" monitor (1600x1200 .26mm)<br>Western Digital WD800JB 80GB 7200rpm<br>Lite-On 24/10/40x CD-RW <b>|</b> Toshiba 16/48x DVD-ROM<br>Windows XP Professional</p><i></i>
Me too.
Not only can I not log in with the rig with SP1 but the computer that I am presently using as well. This unit has IE6 but not SP1. Between the above two log in attempts I was able to easily log in with Netscape 7.<br>I just posted a reply to that effect on this thread before going to check out results at 5 other forums, where I had no such problems. When I got back the post was gone. <p></p><i></i>
Re: Me too.
Stupid thing.. At least the 'mark ALL forums read' thing works. <p>-=-=-=-=-=-=-=-=-=-=-=-=-<br>Athlon Thunderbird 1GHz@1.35GHz (9x150)<br>Iwill KK266<br>256MB Crucial PC133 CAS2 5-2-2<br>Gainward GeForce3 Ti200 4ns 231/524<br>Gateway EV910 19" monitor (1600x1200 .26mm)<br>Western Digital WD800JB 80GB 7200rpm<br>Lite-On 24/10/40x CD-RW <b>|</b> Toshiba 16/48x DVD-ROM<br>Windows XP Professional</p><i></i>
Solved
Well, I think I've solved the problem. EZBoard help reported that there are login issues using IE6 SP1 while viewing through frames. I have been linking to 50 megs and viewing EZBoard through the frame. I now do it the other way around and it works great. As an added bonus, I view the forum with a larger screen. <p></p><i></i>
Re: Solved
Ahh that makes sense. I always come to the forum seperately, not through the front page. <!--EZCODE EMOTICON START
--><img src=http://www.ezboard.com/intl/aenglish/im ... /smile.gif ALT=":)"><!--EZCODE EMOTICON END--> <p>-=-=-=-=-=-=-=-=-=-=-=-=-<br>Athlon Thunderbird 1GHz@1.35GHz (9x150)<br>Iwill KK266<br>256MB Crucial PC133 CAS2 5-2-2<br>Gainward GeForce3 Ti200 4ns 231/524<br>Gateway EV910 19" monitor (1600x1200 .26mm)<br>Western Digital WD800JB 80GB 7200rpm<br>Lite-On 24/10/40x CD-RW <b>|</b> Toshiba 16/48x DVD-ROM<br>Windows XP Professional</p><i></i>
