Case Modding?!

Discussion relating to Socket 7 hardware.
Post Reply
Ye Olde Forum
K6'er
Posts: 66
Joined: Sat Jun 02, 2001 7:58 pm

Case Modding?!

Post by Ye Olde Forum »

[bLuE] <br><br>Posted 5-25-2001 02:52 <br><br>I have just started to mod a old AT case to make it ATX and put 5 80mm fans, does anyone have any thing to say on case moding? any ideas? <p></p><i></i>
Ye Olde Forum
K6'er
Posts: 66
Joined: Sat Jun 02, 2001 7:58 pm

[Super Relay] Re: Case Modding?!

Post by Ye Olde Forum »

Posted 5-25-2001 04:03 <br><br>sweet, the first hardware question <!--EZCODE EMOTICON START :) --><img src=http://www.ezboard.com/intl/aenglish/im ... /smile.gif ALT=":)"><!--EZCODE EMOTICON END--> i am just about finished a very sweet case mod. it incldes <br>92mm top mounted blow hole <br>large air intake on the bottom left <br>custom fanbus for 92mm fan <br>next im going to be working on some noise reduction stuff. ill post some stuff on it in the articles section as soon as i get it up <p></p><i></i>
Ye Olde Forum
K6'er
Posts: 66
Joined: Sat Jun 02, 2001 7:58 pm

[io333] x

Post by Ye Olde Forum »

Posted 5-25-2001 03:47 <br><br>All you need is this link: <br><br><!--EZCODE AUTOLINK START--><a href="http://www.virtualhideout.net/cool_case ... <!--EZCODE AUTOLINK END--> <br><br>Cut and paste it in. It's worth it. I hope you have a fast connection! <br> <br> <p></p><i></i>
monaro327
Veteran K6'er
Posts: 314
Joined: Sun Jun 03, 2001 5:14 am
Contact:

Re: Case Modding?!

Post by monaro327 »

there is cool case mod ideas on that page <p></p><i></i>
Athlon XP-M 2500+ 2444mhz
Geforce 6800le(16pp/6vp) OC 405/825mhz
wd800jb hdd
wd200bb hdd
40gig Seagate IV
1gig ddr ram
Epox 8RDA3+
sblive 5.1
Pioneer 110D DVD Burner
Logitech Z3e & MX518 + EVERGLIDE FUZE
_____________________
User avatar
AZK6er
Veteran K6'er
Posts: 303
Joined: Tue Jun 05, 2001 2:27 am

Re: Case Modding?!

Post by AZK6er »

ibLuE.....<br><br>I'm getting ready to Mod my Mid AT case, cause I want to put in a Blow-Hole on top, and on mine the Top and Sides are all one piece. I'm thinking of taking my Dremel tool and cutting the left hand side (as you're looking at the front of you're case) in the middle of the reinforceing strap that runs front to back, and make that side removeable. 1) so I don't have to worry about pulling the wires loose from the top mounted fan when I pull the case apart for changes\cleaning. 2) make an easier access to the MoBo by simply taking off 1 side instead of the whole thing. What do you think ??????????????<br><br>____________________<br>a.k.a. Desert Dog/ a.k.a. AZK6er<br>From the Arizona Desert<br><br>Where seldom is heard, a discouraging word,<br>unless you connect @ 24000 all day.<br><br>--------------------<br>AMD K6-III 450+ o/c to 550 @ 2.0 Vcore<br>Tyan S1590S AT100<br>Award BIOS 162005096 1998<br>V90W116c Flash<br>V90j116c Over Flash<br>3DFX BigMoFo HSF w\80mm Fan<br>3DFX Case80HO 80mm front Fan<br>Arctic Silver Thermal Compound<br>256MB Crucial CL2 PC100<br>Promise Ultra100 IDE Controller<br>WD 300BB 30GB ATA-100/7200 (SI-Soft = 21985)<br>Radeon VE 32MB DDR (not a gamers card, 3DMark2000 = 1250)<br>U.S.Robotics 56K Win Int 1125-04 R:2<br>SB Live X-Gamer<br>USB Scanner/Printer/Optical mouse<br>Belkin 4 port USB hub<br>Windows Millennium (most excellent)<br><br>K6-er since 5/4/99<br>____________________ <p></p><i></i>
User avatar
blue
Site Admin
Posts: 1047
Joined: Mon Jun 04, 2001 2:37 pm
Location: Sacramento
Contact:

Re: Case Modding?!

Post by blue »

yeah that should be cool! <p></p><i></i>
p3 1ghz laptop
geforce2 go
256mb ram
Post Reply